More detailed scripture with photos. 
 Appointment 
 This machine will help you set up production in the following industries: 
 ● furniture production, production of facades, execution of individual orders 
 ● woodworking, wood carving 
 ● design solutions 
 ● high relief and bas-relief 
 ● molds for the production of ceramics 
 ● matrices 
 ● molds for the production of facade and facing tiles 
 ● advertising production 
 ● molds for casting 
 ● sculptures 
 ● architecture and models 
 ● processing of glass and mirrors 
 ● radio engineering 
 ● food industry 
 ● engraving 
 Designed using electronics from LeadShine. 
 1. Features 
 ➔ The portal of the machine is made of 
 CAST parts with ribs 
 rigidity. 
 ➔ Desktop advantage 
 type exempts from 
 additional costs for 
 transportation. 
 ➔ Possible to install laser 
 module and additional 
 pivot axis, which expands 
 horizons of its use! 
 Specification: 
 Module movement type: 
 1. Linear movement of the module in three coordinates: X / Y / Z, at an angle of 90 degrees. 
 2. Working stroke: 
 X = 1400mm, Y = 2050mm, Z = 170mm (vertical stroke) 
 Work tool: 
 Milling spindle. 
 Cooling: water (included) 
 Power: 2.2KW Collet ER20 
 Spindle control: Frequency 0 - 400 Hz, 
 Number of revolutions per minute: 24000 
 Frequency control: inverter 
 (frequency converter included), 
 input voltage 220 Volts (single phase), 
 output voltage 380 volts (three phases) 
 Spindle installation possible 
 other capacity or several 
 spindles. 

 Inverter (frequency 
 converter) brand BEST, 
 creates smooth acceleration and 
 stopping the spindle rotor. 
 Consists of half of 
 duralumin housing (radiator 
 cooling), and has less 
 interfering values that 
 distinguishes it from cheap 
 plastic inverters. 
 Components used for assembly 
 mechanical part of the equipment: 
 1. Material of portal struts, cast parts from 
 aluminum alloy, with a stiffener. 
 2. Table material - machine profile 
 aluminum T-slot. 
 3. Guides: profile rails with 
 surface hardening. 
 Section 20mm 
 4. Gear elements: 
 - screw type of transmission ball screw 
 Y-axis 2010 
 X-axis 2510 
 Z-axis 1605 
 As load-bearing elements 
 used by 
 industrial profile of European 
 standard, section 80 * 80mm 
 Control unit accessories and 
 electrical part of the machine: 
 - Five-axis opto-decoupling board + relay 
 -Driver DMA860H - operating current up to 7.2A, 
 18 ~ 80V, from LeadShine brand, 
 original, hybrid, with micro 
 step mode up to 51200 steps / revolution. 
 -Motor cable - shielded, 
 section 4 * 1mm 
 -Stepper motors - nema 34, 86BYGH280 

 Current: 4.5A, output torque: 4.4 
 Nm (Nm) 
 -Cooling - fan. 
 -Power Drivers - Source 
 DC 48V / 25A / 1200W 
 Additionally, the machine can be 
 equipped with: 
 ● System unit adapted for 
 machine control. 
 Approximate data of the system unit: 
 Motherboard: (Asus, Intel) 
 Mandatory presence of PCI I / O bus 
 Processor: Intel at least 3 GHz 
 Memory: 2 GB 
 Video card: PCI-E (not built into the motherboard 
 fee) 
 Operating system: 32-bit version 
 Windows XP. LPT port 
 ● zero sensor 
 ● limit switches 
 Set of ready-made models 170GB (shipped 
 via internet connection free of charge) 
 Model presented 
 the machine will help you 
 solve any of your tasks 
 within its 
 appointments and 
 competent approach of the master 
 - from 2D cutting of plywood to 
 MDF production 
 furniture facades, from 3D 
 wood carvings before 
 engraving and processing 
 non-ferrous metals. 
 The machine is delivered in 
 transport form 
 (in five parts) 
 Wooden crate 
 included in the price, 
 approximate weight 340 
 kg. 
 The volume of the cargo is about 2 cubic meters. 
 We are waiting for your 
 questions! 
 We hope we can help you solve 
 production tasks.